-Access the ECU and position it for observing the diodes.
-If the engine does not run, turn the key on and proceed to step #4.
-Start the engine and warm it to operating temperature then idle.
-Turn the diagnostic mode selector on the ECU fully clockwise until both diodes flash 3 times then turn the selector fully counterclockwise. The ECCS system is now in mode 3.
NICOclub is back again with Carlisle Events to host our 18th annual NICOFest Carlisle AutoX…
Kraft Auctions Offers Fans a Chance to Own a Piece of Datsun Racing History
We built Datsun Ranch in 2014, and it was the culmination of a lot of…
Since it's not just Datsuns that are vintage anymore ("classic Nissan" still sounds weird, right?),…
Let's talk about big brake kits for a bit. For the purposes of this article,…
What do these terms mean? Pulsed Secondary Air Injection (PAIR) Valve: The PAIR valve sends…