Categories: 240sx Articles

NAMS s13 Gacchiri Support Install

What we have here is a set of NAMS (Nagisa Auto) Gacchiri Supports… or fender braces as some folk call them. Imagine your arm when you flex to show your big biceps… that is what these are like! Mmmm why don’t you do some pull ups on my arm. Arghhhhhhh!

difficulty: ***

time: 2-3 hours

cost: ~$240

Materials:

– NAMS Gacchiri Support (or fender brace)

Tools:

– Assorted metric socket wrenches and ratchet w/ extensions
– air wrench (optional)
– power drill with appropriate bits
– breaker bar (optional)

Procedure:

First off, take off your bumper and fender. In my opinion, there are WAY too many bolts and nuts for this, but eventually you will get everything off.This is what your car will look like without a fender on. cool.

Next, please notice that you can take this piece off the NAMS part. This will go inside the fender rail thing. I have no idea what it is called.

See, put it in there. You will notice that the stud goes though that hole, but you will have to drill your own hole for the other bolt to go into. Oh my!

So, you keep that in mind. ok? good.

Now, take your awesome 12mm socket and wrench and take off the lowest 3 bolts that hold the door on. (please keep the door SHUT, this will make things much easier.) Put the GACCHIRI support on and put the bolts back in.

Okay, uh oh. What is THIS? Those holes don’t seem to line up very well. Use a swear word now if you please. So what now? Drill it out. Drill it like it is hot.


Yeah I know, it looks really crappy, but figure it out. Please drill out the OTHER hole too. That one looks much better.

You are almost done with this side! How excited are you?

Now, remember that separate piece? good. If you threw it away, you are stupid. So now, wiggle it around inside the fender and please thread on the nut onto the stud, then thread in the bolt to the other hole. COOL.Tighten everything up. I think they nut is a 19mm. Tighten all that up and tighten up the everything with the door bolts too

WAY TO GO!

Bro, you did it!

Now, repeat for the other side.

Feel the power of my biceps!!!!!

by BrianHarte

Aaron

Greg is the owner and CEO of the NICOclub Network, and when he's not restoring an old Datsun, you can probably find him hard at work building the best damn Nissan resource on the web. Make sure you add Greg at Google+!

Recent Posts

NICOFest Carlisle 2024 Registration

NICOclub is back again with Carlisle Events to host our 18th annual NICOFest Carlisle AutoX…

2 months ago

Own a Piece of Datsun Racing History

Kraft Auctions Offers Fans a Chance to Own a Piece of Datsun Racing History

3 months ago

Exhaust Extractor DIY – Tune Indoors!

We built Datsun Ranch in 2014, and it was the culmination of a lot of…

7 months ago

Route 66 JDM Classic 2023 is in the books!

Since it's not just Datsuns that are vintage anymore ("classic Nissan" still sounds weird, right?),…

7 months ago

Buying a big brake kit? Read this first!

Let's talk about big brake kits for a bit. For the purposes of this article,…

7 months ago

1989-1994 240sx AIV / PAIR valve removal

What do these terms mean? Pulsed Secondary Air Injection (PAIR) Valve: The PAIR valve sends…

8 months ago