Categories: 240sx Articles

s13 Door panel removal

by positronone

Overview:

Difficulty: – *

Time: – 10-30 minutes

Cost: – n/a

Tools:

– Phillips head driver
– Flathead driver or prybar

Procedure:

Open the door to gain access to the panel.

Locate your armrest grip and look down into it. There should either be a small square panel or an exposed screw. If you don’t see the panel, feel free to skip ahead.

Pry it up with your flathead gently and pull it out to access the Phillips screw underneath. Remove it.

Gently remove the trim around the door latch handle.

Locate and remove the other Phillips head screw in the part of the panel normally obscured by the side of the dashboard.

The panel should now be ready to pull or pry off.

If you have power accessories, the switches will need to be disconnected after the panel is free from the door.

Aaron

Greg is the owner and CEO of the NICOclub Network, and when he's not restoring an old Datsun, you can probably find him hard at work building the best damn Nissan resource on the web. Make sure you add Greg at Google+!

Recent Posts

NICOFest Carlisle 2024 Registration

NICOclub is back again with Carlisle Events to host our 18th annual NICOFest Carlisle AutoX…

2 months ago

Own a Piece of Datsun Racing History

Kraft Auctions Offers Fans a Chance to Own a Piece of Datsun Racing History

3 months ago

Exhaust Extractor DIY – Tune Indoors!

We built Datsun Ranch in 2014, and it was the culmination of a lot of…

6 months ago

Route 66 JDM Classic 2023 is in the books!

Since it's not just Datsuns that are vintage anymore ("classic Nissan" still sounds weird, right?),…

6 months ago

Buying a big brake kit? Read this first!

Let's talk about big brake kits for a bit. For the purposes of this article,…

7 months ago

1989-1994 240sx AIV / PAIR valve removal

What do these terms mean? Pulsed Secondary Air Injection (PAIR) Valve: The PAIR valve sends…

7 months ago