just completed my ka24e to ka24de swap. A 1995 motor into my 1990 S13. Here is the COMPLETE (to my…
Turbochargers for Automatics Many people wonder if it's a good idea to put a turbocharger on a car with an…
Step 1: Note the zippers exposed in the first picture. These are buried inside the back rest of the seat.…
Tools / Supplies needed: Metric sockets and open end wrenches in various sizes and ratchet drive extensions Gasket scraper /…
This write up will walk you step by step through the process of replacing the rear lower ball joints on…
First off, if you haven't done so, clean off all the old adhesive. Next, sand down and paint your sideskirts,…
To make this project a reality you’ll need the following: A car with an Automatic Transmission (RE4R01A in this case).…
For all you CA owners looking for a standalone system that is far superior to your normal ECU, better than…
*place the pan underneat the driver's side wheel/where the PS pump sits.* ***remove intake assembly, undo all spark plug wires,…
Chances are you've seen several threads recently asking about buying a 240sx, selling a 240sx etc...