Applied Vehicle(s): Nissan 300zx Difficulty Rating: Estimated Labor Time: 1½ hours Written By: es.biggs Estimated Total Cost: $95.00 Find related…
Applied Vehicle(s): Nissan 300zx Difficulty Rating: Estimated Labor Time: 4½ hours Written By: Z-owned Estimated Total Cost: $20.00 Find related…
This article was written by ffrpwner, NICOclub's Z32 Forum Moderator. Let's start with the stock wheels. Note this setup is…
This may work on other cars as well, but I've only tested it on the Z32. The inside of the…
Time - 1-2 hours Tools Needed: - Phillips screw driver - 12mm socket - 12mm wrench - Medium extension -…
Replacing the Thermostat on a VG30ET by:winez31 1: drain the coolant by unbolting the coolant temp sensor at the bottom…
This write-up explains how to check the codes of the ECU in a '90-'95 300ZX. You guys with the '96…
This is an instant and free mod to do to your Z. Tools needed: - Phillips Screwdriver - 10mm Socket…
Since searching around on the internet revealed this is becoming a more common problem as the 300zx ages, I figured…
Time: 2 Hours Tools Needed: - 10mm socket - 12mm socket - Phillips screw driver - Small and Medium Extensions…