This write up is for a 2000-01 VI manifold swap on to 95-99 Maxima. There are many ways to do…
The following information was researched via multiple Maxima FSM's. -------------------------------------------------------------------------------- Base Headunit plug diagram -------------------------------------------------------------------------------- Bose Headunit plug diagram --------------------------------------------------------------------------------…
The following information was researched via multiple Maxima FSM's.For the 4th-gen Maxima, there were numerous options for the stereos, so…
The following directions have been compiled to assist in the installation of an Injen intake onto a '02-03 Maxima. The…
Testing the Knock Sensor (KS): - The KS MUST be checked with a digital ohmmeter. Analog ohmmeters may cause damage…
How To change Motor Mounts:Here are the tools it takes to complete the job: 1) floor jack 2) two 17mm…
Replacing Maxima O2 SensorsUpstream O2 sensors: Necessary tools: *3/8" drive ratchet *22mm O2 sensor removal ratchet (rent it from Autozone…
How to reset SRS(air bag) light:Open the driver's door. Note the rubber covered button located low on the B pillar,…
After doing some searching prior to doing my suspension install recently I found this information:"SB103 for the fronts and SB108…
5th Generation Maxima Head Unit Removal Step 1: Open the ash tray and remove the tray/liner. Below you will see…