Replacing your KA24DE fuel injectors
By: vancouverbc
1. Unscrew your gas cap to relieve fuel pressure.
(you may want to unfasten 2 10mm bolts that hold the electrical bar)
2. Unfasten two philip head screws for each injector. you may need wd40
and impact screw driver if screws are corroded.
3. Push in on fastener and pull off electrical connection at each injector.
4. Take a large (larger the better) flat head screw driver and twist to pop off fuel injector. Cover point of screwdriver with cloth to minimize damage. DO NOT USE A VICE GRIP.
5. Be sure to coat the new injector rings with vaseline.
6. Place new injector in hole. place the large screwdriver on the injector and give a push. the injector will pop in (alternatively, you can use a socket and your palm, I believe it’s a 9mm).
7.If only replacing o-rings, clean injector tail piece before putting injector back.
I bought my new injectors(4) for a total of $207 U.S. shipped to Canada taxes included. You get a $50 core credit if you return old injectors so injectors cost about $35each. Dealer wanted $1000. They give you new o-rings and grease free.
part no.: INJ-NIS1-370-4
NICOclub is back again with Carlisle Events to host our 18th annual NICOFest Carlisle AutoX…
Kraft Auctions Offers Fans a Chance to Own a Piece of Datsun Racing History
We built Datsun Ranch in 2014, and it was the culmination of a lot of…
Since it's not just Datsuns that are vintage anymore ("classic Nissan" still sounds weird, right?),…
Let's talk about big brake kits for a bit. For the purposes of this article,…
What do these terms mean? Pulsed Secondary Air Injection (PAIR) Valve: The PAIR valve sends…