Home Depot Front Lip for S14
By:GrilledCheese33
I waited until my factory lip got scratched and then I had to try this.
Heres how i did it: 8 ft of cove base, 2 rolls of scotch double sided mounting tape (5 lb.), Total cost= $11!I was gonna take the factory lip off, but i got to thinking that i could use it for reinforcement and not tape to the paint!
So I cleaned the factory lip and the inside of the cove with alcohol and let it dry. Then I rolled one line of tape flush withe the bottom of the bumper. Then I used what I had left for a 2nd row on the sides and in the middle.
I then rolled the stuff on flush with the bottom of the bumper, and in 10 minutes i have a nice lip!My friends say it doesn’t bend back at all, so thats great!Enjoy the pics!
NICOclub is back again with Carlisle Events to host our 18th annual NICOFest Carlisle AutoX…
Kraft Auctions Offers Fans a Chance to Own a Piece of Datsun Racing History
We built Datsun Ranch in 2014, and it was the culmination of a lot of…
Since it's not just Datsuns that are vintage anymore ("classic Nissan" still sounds weird, right?),…
Let's talk about big brake kits for a bit. For the purposes of this article,…
What do these terms mean? Pulsed Secondary Air Injection (PAIR) Valve: The PAIR valve sends…