To make this project a reality you’ll need the following: A car with an Automatic Transmission (RE4R01A in this case).…
*place the pan underneat the driver's side wheel/where the PS pump sits.* ***remove intake assembly, undo all spark plug wires,…
I decided to take the ugly fabric off of my door panels today. It was a fairly easy task, and…
1. Unscrew your gas cap to relieve fuel pressure. (you may want to unfasten 2 10mm bolts that hold the…
Custom vented hoods can be as expensive as $1,500. Making your own vent not only means that no one else…
The A'PEX-i Multi-Checker features: Monitors all various aspects of NISSAN vehicles using the diagnostic signal. The Multi-Checker is a valuable…
Tools / Supplies needed: Metric sockets and open end wrenches in various sizes and ratchet drive extensions Gasket scraper /…
Step 1: Note the zippers exposed in the first picture. These are buried inside the back rest of the seat.…
Turbochargers for Automatics Many people wonder if it's a good idea to put a turbocharger on a car with an…
just completed my ka24e to ka24de swap. A 1995 motor into my 1990 S13. Here is the COMPLETE (to my…