Cost -$40. You will need: assorted screwdrivers pliers wire LED's with resistors for 12v a drill with bit the size…
Credit to Beancooker for the writeup. I TAKE NO RESPONSIBILITY IF YOU MESS UP YOUR CAR!!! PROCEED AT YOUR OWN…
This is an install tutorial that will help you to replace both front and rear rotors and calipers, brake pads,…
- Nissan KA24 install article. By Danny Youngs Nissans KA24 motor can be installed into the Datsun 510 in many…
from Nissan Offroad Installers Notes This installation was performed by a certified mechanic and the owner of the vehicle pictured.…
*place the pan underneat the driver's side wheel/where the PS pump sits.* ***remove intake assembly, undo all spark plug wires,…
Applied Vehicle(s): Nissan 240SX Difficulty Rating: Estimated Labor Time: 4 hours Written By: Unknown Estimated Total Cost: $750.00 - $3000.00…
I know this is an old trick but I was so proud of my $15 lip I just had to…
First off, if you haven't done so, clean off all the old adhesive. Next, sand down and paint your sideskirts,…
1995-1998 Nissan 240sx N/A 1-3 Hours NICOclub Rating System bllabong89 Before we start, I just want to say this is…