Thought I'd pass on a write up I did tonight on my G37 vert 6mt. I did this mod on…
Applied Vehicle(s): Infiniti QX4 Difficulty Rating: Estimated Labor Time: 1½ hours Written By: rwardell Estimated Total Cost: $20.00 Find related…
Applied Vehicle(s): All Nissan/Infiniti vehicles Difficulty Rating: Estimated Labor Time: 1 hour Written By: bllabong89 Estimated Total Cost: $15.00 Find…
"Operation Dropbox" - Installing a Stillen Intake and axle-back exhaust on NICO's Nissan CubeCubeDriver.com started modifying Project Cube almost before…
This write up is for a 2000-01 VI manifold swap on to 95-99 Maxima. There are many ways to do…
The following directions have been compiled to assist in the installation of an Injen intake onto a '02-03 Maxima. The…
How To Clean IAC valve: Tools needed: - 10 and 12 mm sockets - 3 inch socket extension - universal…
Installing the VG 30 in a 510 By Michael Spreadbury Thinking about an engine swap? Tired of seeing L16-18-20B's every…
taken from dumbengineer.com Removed 8 case screws, opened unit (clamshell), and mounted on plexiglass using original screws. Using elastic, and…
Maxima Y-pipe and cat installation By: beancooker 1. Remove all heat shields (10mm wrench). 2. Remove O2 sensors. 3.Spray penetrating…