Nissan articles

Installing ITB’s on a KA24DE

Individual Throttle Bodies are common on many high-hp normally-aspirated race engines. This setup gives you immeasurably better throttle response and…

14 years ago

Installing Greddy eManage Into an S13

A straightforward install, most are just tap-ins, apart from these wires. Follow closely, otherwise the car will not start. Please…

14 years ago

Megan Racing Coilover Install (S13)

Installing a fully-adjustable suspension is probably one of the best performance upgrades available for an s-chassis. It can also be…

14 years ago

Installing an FPR on SR20DET

Make sure you have suitable line to connect your FPR. You don't need a rail adapter with the Megan racing…

14 years ago

Installing 180sx Quarter Glass Step-By-Step (no Patrick Duffy)

materials: a friend, knife, heat gun, screw driver, old throttle cable or piano cord, heavy duty glass adhesive, the replacement…

14 years ago

91-94 240sx Vacuum Diagrams – Component Locaters

Click image below for larger view.... Additional detail may be found here: 240sx Factory Service Manual 

14 years ago

S14 Climate Control Panel Bulb Replacement

Overview: Ever had those stupid bulbs in the climate control go out on you? well they did on my car…

14 years ago

DIY JGY Turbo Manifold for KA

I was building my manifold to accept a 2002 WRX internally wastegated turbo, and they didnt have that flange, so…

14 years ago

BikiRom Megaboard Installation

Well I have finished the installation and with minimal problems the car runs off the new board now, the current…

14 years ago

Walbro Fuel Pump Install (S14)

You will probably want to do this install with a tank that is half full, if you do it with…

14 years ago