BY: PhanatikZ32 Composed by: 300ZXttZMAN Z32 COILOVER INSTALLATION Tools needed: – ½” ratchet – 3/8″ ratchet + 3/8″ extension – 10mm socket – 14mm socket *deep* – 17mm socket – 17mm wrench – Phillips screwdriver – BREAKER BAR!!! – Jack + Jack stands – PB Blaster or other rust penetrant spray NOTE: this installation is […]
Z32: Replace a Wheel Stud and Install Hubcentric Wheel Spacers
by: rockchucker After replacing all of my suspension components on my 300ZX I found that my wheel offset was not enough to bring my front wheel flush with the body… So I measured the distance it was off and ordered a Version 1 Ichiba Hubcentric 15mm spacer kit with new longer wheel studs. The version […]