“Operation Dropbox” – Installing a Stillen Intake and axle-back exhaust on NICO’s Nissan CubeCubeDriver.com started modifying Project Cube almost before the ink was dry on the contract.With a lowered stance, and upgraded wheels and tires, it was time to turn our thoughts towards a little performance increase.While the Cube is no stoplight warrior by any […]
NICOfest 2008 Stillen Days Event
NICOfest at Stillen Customer Appreciation Event Wow, what a weekend! NICO returned once again for the 3rd time to join Stillen for their Nissan / Infiniti Customer Appreciation Day. As with typical NICO fashion, the weekend started out with a mini-meet at the local Hooters in Costa Mesa, CA. We had a chance to meet […]
NICOclub at Stillen Meet 2006
Article Series
- NICOclub at Stillen Meet 2006
- G35 Stillen or POP Charger Intake install
- Nissan Altima: Install the Stillen Front Strut Tower Bars
- Nissan Cube Stillen intake and exhaust installation
- NICOfest 2008 Stillen Days Event
- STILLEN Nissan / Infiniti Car Open House -May 12, 2007
- Stillen Versa at SEMA 2006
- NICOfest Nissan Infiniti Event at Stillen 2008
- Stillen Customer Appreciation Day 2010
- How to: Install a Stillen Pulley on QR25DE 2.5S Sentra
2006 NICO at Stillen MeetSunday, May 14, 2006Posted by: Torry On 5/13/06, Stillen held their 4th annual Nissan/Infiniti day, but this time NICO was there. With the largest attendance to date for the Stillen show, cars lined the road in front of the shop in both directions, filling the blocked off street with nothing but […]
Stillen Versa at SEMA 2006
With the recent introduction of new models in the US such as the Honda Fit and Toyota Yaris, there is little doubt that the “economy” car is back. Yet the new economy car is nothing like what many of us remember. Gone are the days of the $4000 Subaru Standard hatchback, a car so inexpensive […]
Nissan Altima: Install the Stillen Front Strut Tower Bars
So my new Stillen Strut tower brace came in and I was excited as hell to install it. At first I wasn’t going to do a full write up on it since Stillen’s instructions are pretty clear but also includes the the instructions to install it on the 09 Maxima but I know that there […]
G35 Stillen or POP Charger Intake install
To install a Stillen or POP Charger Intake (I know JWT gives you instructions, but you never know): Note: if you aren’t installing the Z-tube, disregard Steps 2 & 3 except for unplugging the MAF. 1) Using a 10mm socket, loosen bolt holding the air box to the body. Loosen the hose clamp at the […]
STILLEN Nissan / Infiniti Car Open House -May 12, 2007
STILLEN Nissan / Infiniti Car Open House -May 12, 2007 After two back-to-back meets in Salt Lake City and Carlisle, what better way to shake off the jetlag than to drive Project Vert to LA for the Stillen All-Nissan meet? So, for the third weekend in a row, it was off to a new […]
Stillen Customer Appreciation Day 2010
Time is drawing near for Stillens annual Customer Appreciation Day, and as usual, NICOclub will be there! Come out and meet Steve Millen, your NICOclub staff, and tour the facility!