Eighteen months, 20,000 miles, a bunch of modifications, and countless questions from passers-by… The story of the cubedriver.com Nissan Cube thus far.
Nissan Cube strut and spring installation
“Operation Dropbox” – Installing lowering springs on NICO’s Nissan Cube Had a couple hours between projects yesterday, so I fired up the A/C in the garage (it was 115 degrees out!) and broke out the tools. Our ’09 Cube has 650 miles on the odometer, so what better time to start taking it apart and […]
DIY guide to lowering a Nissan/Datsun pickup truck
Many people tend to be curious as to the lowering of their pickups when they get them. This is the simple process to lower a Nissan or Datsun truck. It covers models all the way from back in the Datsun days through the hardbody days. The process uses lowering blocks in the rear and adjusting […]
Altima Coupe Eibach Prokit Spring Install
Props: To Guitarist982 for knocking this out with me, taking notes, pictures, and throwing his weight behind the effort when brute force was necessary. Notes: These instructions are for the Altima Coupe 3.5. Although the variations between the 3.5 and the 2.5 are minimal, these instructions may not be entirely accurate for the 2.5. Guitarist […]