Eighteen months, 20,000 miles, a bunch of modifications, and countless questions from passers-by… The story of the cubedriver.com Nissan Cube thus far.
This tutorial will guide you on how to install a K&N intake on a 2.5 Nissan Altima Supplies needed: K&N intake “kit” 8mm and 10mm sockets ratchet and extension philips and flathead screwdrivers 3mm and 5mm allen key wrenches pliers rags (box of rags works wonders) Steps: 1) Turn off the ignition and disconnect the […]
The following directions have been compiled to assist in the installation of an Injen intake onto a ’02-03 Maxima. The directions should also work with ’00-01 Maximas as well. Tools needed: 10mm socket + ratchet, ratchet extension, 10mm wrench, flat-head and phillips head screwdriver, Pliars ——————————————————————————– Parts: The injen intake should consist of the following […]