Written by Canaan Manley, Trim & Chassis Process Engineer – Nissan Canton, MS (screen name: Promise Land) When I found out that I had won a contest that Nissan was offering for 2 employees to travel to the NTEA Show in St. Louis, MO, I was excited to watch the new LCV be revealed. I have […]
RB25DET into S13 Wiring Guide
RB25DET into S13 wiring harness conversion What is needed to complete the wiring harness conversion? 1. rb25det engine wiring harness 2. s13 ka24e or de engine wiring harness 3. rb25det lower harness 4. s13 ka24e or de lower harness 5. soldier 6. soldiering iron 7. wire cutters and stripers 8. Tape and heat shrink. O2 […]
How to: S14 Subframe Removal
1995-1998 Nissan 240sx N/A 1-3 Hours NICOclub Rating System bllabong89 Before we start, I just want to say this is to remove the subframe if you already have the rear suspension/hub assembly removed. Also, If I have missed anything and/or have something incorrect, please give your input. This is here to help people who may […]
Infiniti M35 / M45 Fogs Only Operation Modification
I’ve always wanted to have the factory fog light switch on my Infiniti M45 to work independently. In other words, as long as the car is on, the factory fog switch can control the fogs whether the low beams or high beams are on or off. I was going to add a relay to […]
Infiniti M35 / M45 PA15-INFI (iPod Module) Installation
2006-2007 Infiniti M35/M45 ~$170 1½ hour NICOclub Rating System ellis I have a 2007 M45 with both navigation and XM satellite radio. I wanted to keep XM and be also able to play my iPod and have a 3.5mm jack, of which the PA15-INFI module allows for. The entire installation was relatively easy. I first […]
Direct Bolt Up 180sx 280mm Brake Swap WITH NO OVERHANG
So I have finally figured it out! Everyone has been doing what the article for 180sx swap tells them to do. That is, to use the 93-01 Altima rotors and calipers or 89-99 Maxima calipers (since the Altima and Maxima used the same ones). However this results with a 6mm overhang which, as I […]
How To Roll Your Fenders
All Vehicles $150+ (depending on roller cost) 1-1/2 hours NICOclub Rating System RimTuck My rear tire sidewalls were rubbing against my Datsun 280Z rear quarter panel’s lip: Quarter panel’s lip before rolling: (the tire actually caught on the lip, and yanked it downwards slightly) Have the car up on jack stands, and remove the wheel. […]
VI. Interesting Sections (Nissan Sport Magazine, Commercials, ROTM)
Aside from providing technical help and an enjoyable community, NICOclub also has several special niches that new and old members alike would be interested in exploring: NICOclub Regional and International Forums — Nissan/Infiniti Commercial Repository — NICOclub Ride of the Month (ROTM)
IV. Forum Technical Help (Posting Images, Enabling PMs, General FAQs)
Instructions on how to include images in your thread/post can be found in the following tutorial: If you’d prefer to setup an account and manage the images at a later date, please refer to the Photobucket Tutorial. If you’d prefer a faster upload method, but inability to manage the images (with a potential for deletion), […]
III. Guide to our Technical Information (Articles, FSMs, Automotive Advice)
NICOclub offers accurate Nissan technical information from a team of factory-trained Nissan and Infiniti technicians, a friendly, welcoming and supportive ‘family’ environment and a true sense of community. However, the abundance of information can seem overwhelming to some users. If that someone is you, follow this simple guide to our technical information! You may see […]
- « Previous Page
- 1
- …
- 141
- 142
- 143
- 144
- 145
- …
- 152
- Next Page »