By: z32pilot62 Composed by: 300ZXttZMAN When you put HID’s in your headlights and you are on the highway, it’s very nice to not have to turn them off every time you turn on your high beams. This also increases their life… In the image you will notice that the YELLOW arrow points out the factory […]
Z32: Projector Lens Cleaning
This may work on other cars as well, but I’ve only tested it on the Z32. The inside of the projector lens on the Z32 low beams gets dirty over time. If they’ve never been cleaned, that’s 15+ years of dirt and grime reducing your light output. Here’s a simple method to restore light to […]
Nissan Murano- Halogen to OEM HID (Xenon) conversion
I posted this in the Murano forum but figured this is probably a more fitting forum for it. My wife has a 2003 Murano and quite frankly the halogen bulbs suck. I decided to look into doing the conversion. I talked to a dealer to see if they could do it and how much it […]
Infiniti Q45 HID Projector Installation
As some of you know I was working for a long time on putting some HID’s in my car. Of course….I couldn’t do it the easy way by getting a plug and play kit off ebay. It just wouldn’t be as fun without using power tools. Well I talked to my friend who happens to […]
Lighting choices for your car – HID, Halogen, kits
As you know, whether from seeing cars on the road or hearing people talk, there are multiple forms of automotive lighting available. I will discuss standard halogen lighting and HID lighting as well as important terms in the following tech article. Many automotive manufacturers, including Nissan, Infiniti, Audi, VW, BMW, Toyota, Lexus, Acura, Ford, and […]
2002-2003 Nissan Maxima – Upgrade foglights to HID
The following directions can be utilized in converting the factory foglights to HID bulbs in the 2002-2003 Maxima. One person can accomplish this task with no problems. Please view pictures with steps for additional detailed information. NOTE: If you have purchased new lights that have “DEPOT” stamped across the glass instead of Nissan, please see […]
Altima Coupe Bumper Removal
Altima Coupe Bumper Removal This is used for reference on installing an aftermarket HID kit on your Altima Coupe. This step is needed for the installation Step One: Gather your tools. You will need a Phillips and a small flat-head screwdriver. Step Two: Open Hood. There will be 8 clips on the top of the […]
Nissan Altima Aftermarket HID Installation without Bumper Removal
First, always disconnect the negative terminal of the battery when working with power Remove wheels. Always chock your back tires for safety. Underneath the bumper, there are 3 screws on each side which need to be removed. Not the clips, just the screws. Inside the well, you’ll find about 8-9 clips that have […]