For the 2006 SEMA show in Las Vegas, Brian Fox had worked with a tuner and presented a 2007 NissanVersa turbo that was a hit with the Nissan crowd.Later in the year, Brian and car tuner Kenny (TurboChargers.com) were talking on the phone discussing the possibility of building another SEMAproject out of a new […]
1997 Nissan Altima :NICOclub Ride of the Month | ultimatuc
This Altima scorched the 1/4 mile in a scant 12.7 seconds at 110 mph, making this the quickest documented Nissan Altima around and most likely the quickest front-wheel drive, KA24DE powered car in existence until proven otherwise.
Altima Coupe Removing Seats and Carpet for Sound Dampening Install
So I finally found the time to tear apart the A/C and apply the B-Quiet material to the car. I honestly cannot believe how huge a difference this made. There’s a patch of bricks down the street from my house I drive over every day, and after the install I didn’t hear the bricks under […]
Altima Coupe Taillight Removal
First you have to pull away the trunk wall carpeting from its original position near the tail light. You do this by simply finding where its carpet edges meet the car body near the top of the trunk bowl and pulling on it. However once you get near the inside you can see theres a […]
Altima Center Console Removal
DIY – Altima Center Console Removal Overview: This is a DIY for the removal of the center console to be able to install LEDs in the cup holders, replacement of heated seats switches, or work on the E-Brake system or whatever else is in the center console. Difficulty:2 Time:15 minutes Cost: depends on what you […]
Do It Yourself Shifter Boot and Arm Rest Install – Altima Coupe
Overview: This DIY is to help install a ShiftStyle or similar product on the Altima Coupe Difficulty:2 Time:60 minutes Cost:$50 – $100 Materials: Shift boot and arm rest Tools: flat screwdriver, philips screw driver Procedure This procedure should help guide you to remove and replace the shift boot and/or arm rest on the altima coupe […]
Nissan Altima K&N Intake Install Guide for 2.5
This tutorial will guide you on how to install a K&N intake on a 2.5 Nissan Altima Supplies needed: K&N intake “kit” 8mm and 10mm sockets ratchet and extension philips and flathead screwdrivers 3mm and 5mm allen key wrenches pliers rags (box of rags works wonders) Steps: 1) Turn off the ignition and disconnect the […]
Installing LED lights in an Altima Coupe
Alrighty, so here’s the how to, pretty straight forward, toughest part was getting the wire from the engine compartment to the driver’s panel. Prepping of car: I will skip the details in some of the easier steps, such as -take off the front grill – all plastic clips, then pull straight out -take off the […]
Altima Coupe Painting Taillights
In this article we will be painting a set a Altima Coupe taillights. This is an alternative to using vinyl overlays as it is easier to apply and slightly more permanent. Note: Check with your local jurisdiction before performing this as it may not be legal in all states. Skill Level 1 of 5 Time […]
Altima Coupe Replace bumper support bar
First you are going to have to take a trip to your local hardware store and pick up a few things. I went to Home Depot and walked around for an hour before I came up with this idea. You need: -Saw- I used a reciprocating saw (not the best, but that’s what I had) […]
- « Previous Page
- 1
- 2
- 3
- 4
- …
- 6
- Next Page »