NICOclub

The Nissan and Infiniti enthusiast community - Repairs, modifications, resources and much more!

Search NICOclub.com
search

Infiniti G35 Air Filter Replacement

by

I actually looked in the FSM and owner’s manual and couldn’t find this so I went to the garage and here’s what I found… Remove the clips on the duct by prying the centers out with a small screw driver.Unsnap the four retainer clips Remove the 10MM bolt that holds the back side of the […]

Infiniti Q45 Rough Idle Diagnosis

by

Resolving Rough IdleBy Jesda Gulati Fuel Injectors – Bad gas or regional mixtures tend to result inearly injector failures. A fuel smell in the cabin also hintsat injector problems. Non-OEM injectors are not recommended.Learn how to test your injectors Fuel System- Purchase a can of BG44kfrom Infiniti of Scottsdale and add it to a 3/4 […]

Infiniti Q45 Technical Data / Specifications / Capacities

by

Facts Built in Japan. Produced 1989-1996. Year-to-Year Changes (Src: Consumer Guide, some changes made) 1990 Infiniti Q45: The 1990 Q45 is the most sought after by performance enthusiasts for having the tightest and most responsive steering, quickest shifting, and an actual power rating of 300-305hp. Because of a “gentleman’s agreement” among Japanese manufacturers, vehicles above […]

Infiniti Q45 Introduction to Performance Modifications

by

Article Series

By Wes Stinson Feel free to contact me with any questions about any of the things on this article. So, you want to make your Q better? You want to make it faster, handle better, and make it look sharper. Despite what you may think, it is much easier than you think. This is based […]

Infiniti G35: Technical Data / Specifications / Capacities

by

By rydwhite 2003/2004 G35 Sedan Engine: 3.5 liter V6 (VQ 35) Drive Type: Rear-wheel drive/Optional All-wheel drive (G35X) Horsepower: 260 @ 6,000 RPM Torque: 260 lb-ft @4,800 RPM Suspension: Front: Independent, forged-aluminum multi-link with coil springs over ripple-control shock absorbers, stabilizer bar. Rear: Independent, forged-aluminum multi-link with coil springs, outboard ripple-control shock absorbers, stabilizer bar. […]

Infiniti J30 Specifications and Technical FAQ

by

By: driverdriver This post is divided into six sections: Post Content: (1.0) J30 General Information (2.0) J30 & Media (3.0) J30 Modifications & Maintenance (4.0) Is this normal? (5.0) What should I look for in a used J30? (6.0) J30 Wisdom (from owners who’ve learned the hard way) (1.0) J30 General Information (1.1) When did […]

M35 / M45 Specifications

by

By: szhosian The posts in this thread are the basic technical specifications and other information of the various M models. Remember to click the pictures to see larger images, etc. The information presented was collected and gathered from public web sites, as well as various Nissan and Infiniti User’s Guides, Owner’s Manuals and Service Manuals […]

Z32 Brake Upgrade Installation on a Q45

by

Installing Z32 brakes onto your Q45 By: Wes Stinson Here’s my parts list. 4 Brembo blanks (brand new) Z32 30mm calipers OEM pads 1 big and 1 small bottle of Valvoline synpower brake fluid Caliper grease Braided SS Z32 240 conversion lines OR You can use the factory lines*(SEE NOTE AT END) Speed bleeders Started […]

Replacing Motor Mounts on an Infiniti Q45

by

By: Wes Stinson Diagnosis of bad motor mounts: – Set the parking brake – Put the car in drive – Place foot on brake as firmly as possible – Floor the gas pedal, release quickly – Have a helper (standing to the side) approximate the distance the engine moved – Anything over 1 inch and […]