Overview:If you have a dark spot on your gauges or you’re tired of staring at the dim greenish light and want to ruin your eyes with wacky colors, this article is for you. Difficulty: ** Time: 30 miutes Cost: ~$5 Materials:– 3ea 194 wedge type bulbs Tools:– Phillips screwdrivers– pliers Procedure: Please note that this […]
240sx Engine Descriptions
Nissan Engine Designation Help KA-24-D-E (also … SR20DET) + KA is the Series + 24 is the displacement … 2.4L in this case + D is the valve train layout … D = DOHC … no letter = SOHC + E is the fuel delivery layout … E = multiport fuel injection VG33ER – the […]
240sx Convertible door pillar removal
Removal of the 240sx Convertible door pillars and converting the seat belts.
Installing SPL Coilovers on S14
Applied Vehicle(s): Nissan 240SX Difficulty Rating: Estimated Labor Time: 4 hours Written By: Unknown Estimated Total Cost: $750.00 – $3000.00 Find related tutorials and information on your vehicle in NICOclub’s Nissan Forums & Infiniti Forums Overview: Coilovers allow the ultimate in adjustable suspension performance for your car, and they are easier to install than a […]
95silvia14’s DIY HKS Turbo Timer Install
This write up is for installing an HKS turbo timer WITHOUT the use of the adapter harness.
Difficulty: ***
Time: 2-4 hours
Cost: $100-$150
Tools:
– wire cutter/stripper
– screwdriver
Materials:
240sx Conversions – An Introduction
240sx Conversions – An Introduction By:ClubSX (Pat) For NICOnaut Newbies or even if your not that would like to know the different front-end conversions then this thread is for you. The following are common front-end conversions that have been done to the 240sx. Help on putting together the kit can be found by doing a […]
Custom CAI Install
Overview How to build and install a custom Cold Air Intake (CAI) on a KA24DE S13. by thenameismatt Warning: This looks really long because I wrote out everything in detail for you guys, its really not that bad. I’ve had this idea for a while now I just finally got around to do it, engine […]
240sx: S13 Hydraulic Strut Hood Lift
Difficulty: ***
Time: 1-2 hours
Cost: ~$50
Tools:
– welder (muffler shop can do this for you)
– Dremel and cutoff wheel
– power drill…
JDM Lighting Info for Conversions
Halogen Lights or bricks foglamps: h3c hi/low beams: h4 Dual Projectors foglamps: h3c low beams: h3c hi beams: h3 Triple Projectors foglamps: h3c low beams: h1 high beams: h3 *thanks to 574-240sx*
Repairing Bad A/C Compressor
by Wa-Chiss Overview: O.K., I was experiencing some bad leaking problems in my A/C. We tried the stop leak system but it didn’t work. I was changing my oil one day and while I was underneath the car I notices the sway-bar was soaking wet right under the compressor. So, I decided it was time […]
- « Previous Page
- 1
- …
- 12
- 13
- 14
- 15
- 16
- …
- 34
- Next Page »