I got a quote of $220 to replace my valve seals and go over my head, and thought that was a little absurd. So, I decided to take the plunge and do it myself. There really isn’t much to it, after its all said and done. You just need the right tools that can be […]
G37 Removing Sports Seat Thigh Bolsters
Those of you with G37 sports seats may have noticed that the thigh bolsters are a little tight. A little research has yielded that the USDM and JDM seats are the same size. So Nissan/Infiniti probably designed them more for the small statured Japanese businessman instead of the larger statured American. You HAD two options: […]
Removing Altima Coupe Chrome Grill Inserts for Painting
For those of you who plan on painting the chrome grill inserts, here is a quick how-to. I just got the plastic pieces off today. I took a few pictures for those who havent done it yet but are planning on it. The key to all of this is patience. Removing the Inserts Take a […]
Painting Your G37 Grill
I figured I’d paint my G37 grill black. Well actually I tried smoke metal first, (see below) but didn’t like it. For anyone else who has had this idea here’s a write up. 1. First remove the grill from the car (thats a pain in the butt) 2. Sand the grill down with 100 grit […]
G35 6MT Rogue Engineering Short Shifter Install
Lift the car. In my case, its a black 06 G35 coupe. I pulled the center console (was a little scared something would break, but none did – just pull “up” and “out”) to get access to the factory shifter. I took a water pump plier, wrapped the teeth of the wrench with an old […]
Ways to Improve Fuel Economy
With gas prices continuing on their upwards trend, we find ourselves looking for ways to increase our vehicle’s fuel economy. Here is a list of things you can do to improve your vehicle’s fuel consumption. Some will also improve acceleration and overall horsepower. Many of you may be skeptical about the realistic savings ($) that […]
VQ35DE 6MT G35 Accessory Belt Change
Items Needed: -Ratchet with 10mm, 12mm, & 14mm sockets and an extension (I used a 3″)-2-3 ft cheater bar (You will NEED this unless you have a long handle ratchet)-Latex Gloves (optional)-2 Drive Belts (power steering/Alternator and A/C) Access First off, remove the intake scoop. Now remove the under body covering. This is the most […]
Altima Instrument Gauge Lighting Change
First, I separated the the three pieces. They are easy to disassemble. Nothing but clips holding it together. Next, I separated the Bezel that has the notches for the speed, rpm, ect. I didn’t take off the needles because, I have had a bad experiences with that before. So, I peeled back the gauges and […]
Altima Coupe Audi R8 LED strip retrofit
First, you have to determine if you have the gap needed for the lights. If you have the Stillen fascia, you’ll have the gap needed. Not sure on the stock so you’ll need to look and measure the distance. You’ll need about 1/4″ inches to fit the LEDs. Next, you’ll need 2 – 19″ white […]
G37 Headlight Foglight Parking light Install
1. Loosen lug nuts on a front tire (I started with the left front one) 2. Jack car up and remove lug nuts and tire 3. Pop out the three plastic clips on the wheel well so it can be folded behind the brake. After that, you will see this once you look in there […]
- « Previous Page
- 1
- …
- 98
- 99
- 100
- 101
- 102
- …
- 152
- Next Page »