Click for better viewing
How to remove Q45 HVAC Evaporator and Cooling Unit
Here’s a little write-up on how to remove the Cooling Unit from your G50 Q45. The Cooling Unit is where the AC evaporator is found as well as the expansion valve. I’m starting with the glove box already removed, since most of us have done this and to help keep this short and sweet. I’ve […]
Wilwood Big Brake Installation 240sx
Wilwood Big Brake Installation and review by Fahaka: A good thrill can come from many different sources. Perhaps your thrill may come from a fast roller coaster or riding horses or, as in my case, a fast car. In fact a fast car can be extra thrilling if it is a car that you have […]
Z31: Replacing the Thermostat on a VG30ET
Replacing the Thermostat on a VG30ET by:winez31 1: drain the coolant by unbolting the coolant temp sensor at the bottom of the radiator. It will have two wires coming out of it just follow them up and unplug it. 2: unscrew and remove the hose clamps from the small hose thats connected to the thermostat […]
How to build a $40 windsplitter
I wanted a windsplitter for my maxima, however they are very expensive. So… Go to home depot and buy a gallon of fiberglass resin and a sheet of 1/8″ masonite (hard press fiberboard) $35. Go to a fabric store and buy two yards of fleece $5. Go to a specialty fastener store (Tacoma screw) and […]
Installing a PCV Blow-by Oil Catch on a Nissan Maxima/Infiniti I30
Credit to Beancooker for the writeup. I TAKE NO RESPONSIBILITY IF YOU MESS UP YOUR CAR!!! PROCEED AT YOUR OWN RISK!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! O.k. this is a really easy mod, it won’t give you horsepower, per se, but keeps you from burning any blow-by oil and dirtying your intake manifold. Also adding oil to gas lowers octane […]
Tuning SU Carburetors
Tuning your SU carburettors by Scott Fisher I’ve been meaning to write this up for some time, ever since I did the SU Performance Tuning 101 a few months ago. This one is more like Basic SU Adjustment for Happy Driving. The trick to tuning SU carbs is to understand that there are two things […]
Installing the VG30 in a Datsun 510
Installing the VG 30 in a 510 By Michael Spreadbury Thinking about an engine swap? Tired of seeing L16-18-20B’s every time that you open a 510 hood? Want to have a reliable, powerful 510? Consider the VG30, Nissan’s 3.0 liter V6 engine. There have been many requests for an article about installing the Nissan VG30 […]
Installing a KA24 into a Datsun 510
– Nissan KA24 install article. By Danny Youngs Nissans KA24 motor can be installed into the Datsun 510 in many different ways and forms. In this article I will cover every facet of installation and the different parts you can use to do this. I studied many different ways of doing the install before I […]
The History of the Infiniti J30
In the summer of 1988, a team of designers in La Jolla, California, under the direction Keiichi Shinohara, started work on a “personal” luxury sedan for Infiniti. The Nissan Design International team focused on balance and excellence in all categories – a complete package – not just excelling in a single area. A shape for […]
- « Previous Page
- 1
- …
- 107
- 108
- 109
- 110
- 111
- …
- 152
- Next Page »








