NICOclub

The Nissan and Infiniti enthusiast community - Repairs, modifications, resources and much more!

Search NICOclub.com
search

Nissan Fuga Owners Meet… in Japan! (Part 4)

by

Article Series

A short time later, a crew of some other tuners showed up. One car was especially nice, a Z32 Fairlady. There was also an S13 coupe with bolt on overfenders, but under the hood was pretty nasty looking. There were a couple JZX 100 Mark II, a Celsior and something else. Some nice, some not […]

Nissan Fuga Owners Meet… in Japan! (Part 3)

by

Article Series

Pretty much all the Fuga owners had done tasteful modifications. Most had some kind of car audio/video set up, or LED lighting inside and outside the car, but nothing extreme or over the top. After some more small talk, photo taking, coffee drinking, runs to the toilet, getting food at the convenience store, it’s decided […]

Nissan Fuga Owners Meet… in Japan! (Part 2)

by

Article Series

Another guy I spoke with had a 350GT that had quite a bit of work done to it. It was dropped on Tanabe suspension, riding on a set of one-off 21 X 9.0J wheels wrapped in 245/30 rubber. Under the hood, he runs a Group M’s intake with a real carbon fibre airbox, and a […]

Power Window Reset for later-Gen’s

by

These instructions can be utilized to reset the power window modules for newer-generation Nissan and Infiniti products Reset Power Windows: If the power window automatic function (closing only) does not operate properly, perform the following procedure to initialize the power window system. 1. Push the ignition switch to the ON position. 2. Close the door. […]

Car Frame Rail Replacement

by

Applied Vehicle(s): All Nissan/Infiniti vehicles Difficulty Rating: Estimated Labor Time: 5 hours Written By: gmac708 Estimated Total Cost: $95.00 Find related tutorials and information on your vehicle in NICOclub’s Nissan Forums & Infiniti Forums I recently replace the floors in my 1970 240Z. I used the Zedd findings floor panels and the Baddog parts frame […]

DIY – Installing a Basic Remote Starter

by

Installing a remote starter on your Nissan / Infiniti This is going to be a very high level, quick walk through of installing a basic remote start in a non immobilizer equipped car. Basically if your keys don’t have a chip in them, and you can get copies made anywhere and it will start your […]

Remove and Install Lug Studs

by

Applied Vehicle(s): All Nissan/Infiniti vehicles Difficulty Rating: Estimated Labor Time: 1 hour Written By: bllabong89 Estimated Total Cost: $15.00 Find related tutorials and information on your vehicle in NICOclub’s Nissan Forums & Infiniti Forums So I just put my extended lug studs in and I just wanted to make a How To article so people […]

Fix Door Latch Mechanism(s)

by

Applied Vehicles: Infiniti & Nissan Vehicles (i.e. Maxima) Difficulty Rating: Estimated Labor Time: 1½ hours Written By: ron.jacak Estimated Total Cost: $0.00 Find related tutorials and information on your vehicle in NICOclub’s Nissan Forums & Infiniti Forums Tools Required: Screw drivers, and general mechanics sockets, ratchets, and wrenches. My car is a 1997 Nissan Maxima […]