Infiniti Q45 Rear Sway Bar Installation and Upgrade Steps Typically, your rear sway bar bushings will be hard and worn and deformed from years of use, so while you’re installing your new 20mm Active rear sway bar, I recommend new polyurethane bushings. Old and new side by side. Notice how much longer the OEM link […]
Infiniti G35: Technical Data / Specifications / Capacities
By rydwhite 2003/2004 G35 Sedan Engine: 3.5 liter V6 (VQ 35) Drive Type: Rear-wheel drive/Optional All-wheel drive (G35X) Horsepower: 260 @ 6,000 RPM Torque: 260 lb-ft @4,800 RPM Suspension: Front: Independent, forged-aluminum multi-link with coil springs over ripple-control shock absorbers, stabilizer bar. Rear: Independent, forged-aluminum multi-link with coil springs, outboard ripple-control shock absorbers, stabilizer bar. […]
Infiniti J30 Specifications and Technical FAQ
By: driverdriver This post is divided into six sections: Post Content: (1.0) J30 General Information (2.0) J30 & Media (3.0) J30 Modifications & Maintenance (4.0) Is this normal? (5.0) What should I look for in a used J30? (6.0) J30 Wisdom (from owners who’ve learned the hard way) (1.0) J30 General Information (1.1) When did […]
M35 / M45 Specifications
By: szhosian The posts in this thread are the basic technical specifications and other information of the various M models. Remember to click the pictures to see larger images, etc. The information presented was collected and gathered from public web sites, as well as various Nissan and Infiniti User’s Guides, Owner’s Manuals and Service Manuals […]
4th-Gen Maxima Strut Boots Replacement
After doing some searching prior to doing my suspension install recently I found this information: “SB103 for the fronts and SB108 for the rears. Select the front boots for 95′ Mustang (SB103) and rear boots for 95′ Miata (SB108).” I thought that with all of the people looking to do suspension installs I would post […]
Cleaning Idle Air Control Valve
How To Clean IAC valve: Tools needed: – 10 and 12 mm sockets – 3 inch socket extension – universal joint (swivel pivot socket thing) – 12-inch ratchet (a short ratchet may not work – need something to apply a lot of torque to loosen the bolts) – Phillip’s screwdriver – rag – throttle body […]
5th-Generation Maxima Injen Intake Installation
The following directions have been compiled to assist in the installation of an Injen intake onto a ’02-03 Maxima. The directions should also work with ’00-01 Maximas as well. Tools needed: 10mm socket + ratchet, ratchet extension, 10mm wrench, flat-head and phillips head screwdriver, Pliars ——————————————————————————– Parts: The injen intake should consist of the following […]
Nissan Altima How To Replace Front & Rear Rotors
In this tutorial, we will show you how to replace your OEM rotors with aftermarket Stillen rotors on a Nissan Altima. It is a very easy procedure and requires the following: Difficulty: Easy Tools: Jack & stand, 19mm wrench (not socket/ratchet) Time: Roughly 20 minutes per rotor Front: Comparison Step 1: Starting at the front, […]
Nissan Maxima – How To Install Rear Wheel Spacers
This How-To was performed on a 5th-Generation (2k2) Maxima. Installation should be similar to other Maxima generations as well. Special thanks for this write up goes to Fezzik (David Honey). Posted with permission from the author. This is going to be a simple How To for the H&R wheel spacer on the rear. When you […]
Changing the Brakes on an Infiniti G35
First off, I’m going to include some pictures and diagrams once I get back to my home computer later today, so this is just the write up phase of things and I”ll include pics from the FSM… So anyway, this weekend, I went over to Ryan’s house to replace the brakes on his G35….Here’s what […]
- « Previous Page
- 1
- …
- 4
- 5
- 6
- 7
- 8
- …
- 10
- Next Page »