The Nissan and Infiniti enthusiast community - Repairs, modifications, resources and much more!
The following information was researched via multiple Maxima FSM’s. ——————————————————————————– Base Headunit plug diagram ——————————————————————————– Bose Headunit plug diagram ——————————————————————————– Bose amp plug diagram ——————————————————————————– Speaker Wiring Chart (Both Bose and Non-Bose) Information provided by:audtatious
The following directions have been compiled to assist in the installation of an Injen intake onto a ’02-03 Maxima. The directions should also work with ’00-01 Maximas as well. Tools needed: 10mm socket + ratchet, ratchet extension, 10mm wrench, flat-head and phillips head screwdriver, Pliars ——————————————————————————– Parts: The injen intake should consist of the following […]
The following directions can be utilized in the installation of an Addco RSB onto a 5th Generation (2000-2003) Maxima. Installation onto a 4th generation (1995-1999) should be similar. It is recommended that two people perform the installation, but, one person could accomplish the task. Please view pictures with steps for additional detailed information. Step 1. […]
This write up is for a 2000-01 VI manifold swap on to 95-99 Maxima. There are many ways to do this swap so first I will number the ways I know how to do this and then go into detail on how to do it. There are a couple of different Upper manifolds you can […]
There have been lots of questions lately about this mod, so here are the facts as they pertain to 95-97. I am sure that they are the same for the 98-99.5, but my actual swap was in a 96. Also, these will work with an I30 or I30t, so long as you use a donor […]
After doing some searching prior to doing my suspension install recently I found this information: “SB103 for the fronts and SB108 for the rears. Select the front boots for 95′ Mustang (SB103) and rear boots for 95′ Miata (SB108).” I thought that with all of the people looking to do suspension installs I would post […]
I recently had to replace my remote, but I was unable to find anywhere on the Web the instructions for registering the remote unit with the car’s computer. I eventually obtained the following instructions from an Infiniti Dealer and I have posted them below. 1.Get in & lock the doors2.Insert the key into the ignition […]
Special thanks for this write up goes to Fezzik (David Honey). Posted with permission from the author. This is a simple how-to on going from plain to chrome This works for all 5th and 5.5th gen Maximas This install is basically the same for the 5.0th gen and the 5.5th gen maximas. This install is […]
Special thanks for this write up goes to audtatious (Matt Moody). Posted with permission from the author. Use this image as a location reference to the steps below: Step 1: Use a flat head screwdriver and remove the plug at the bottom of the “grip” (what you use to close the door from the inside). […]
This How-To was performed on a 5th-Generation (2k2) Maxima. Installation should be similar to other Maxima generations as well. Special thanks for this write up goes to Fezzik (David Honey). Posted with permission from the author. This is going to be a simple How To for the H&R wheel spacer on the rear. When you […]
