Overview: Are the automatic seat belts in your Nissan acting up? Does the belt refuse to plug into the buckle? Does the belt stay in the driving position all the time? How would you like to fix all of those issues, at no out of pocket cost? I know there are lots of you out […]
Neverlift’s DIY Drift Brake Knob!
This is a cheap and simple mod designed to save people the $10-$20 they would otherwise be spending on a “drift knob” that cost less than $1 to manufacture.
Difficulty: **
Time: 1 hour
Cost: Free…
LED interior lights: Trunk Lamp
Alright, so, this is what we start with. Test vehicle is a 1995 240sx base model (which, for the trunk, means nothing, as the SE model is no different in the trunk). I enjoy nearly every aspect of my car, I love it, but there was always something left to be had when I’d open the trunk or door at night or in low-light areas. What can we do about that? Well I have the answer…
240sx2nr95’s Kouki S14 Sideskirts Installation
First off, if you haven’t done so, clean off all the old adhesive.
Next, sand down and paint your sideskirts, or have them painted.
If they’re already your color, perfect move on to the next step!
After sanding, I used a high quality exterior enamel satin black paint to paint the sideskirts, my mudflaps and my lip.Resists rock chips and well and holds up nicely to the elements (going on 3 years on the lip without needing a repaint.)
Low-Budget Battery Relocation – 240sx
Low-Budget Battery Relocation
by:Kenrik
You know you want to move your battery to the trunk but you don’t want to fork over more then $50 + for a kit and have to wait for it to come in the mail.
I will show you how you can put together and install your own quality kit for much less and with locally bought parts.
What you need and where to get it!
S13 Low-Budget Front Lip
I know this is an old trick but I was so proud of my $15 lip I just had to post it! I put it on the other day and I think it looks pretty good.
Its no PDM lip but it also doesnt make me cringe every time enter a high angle driveway or hit a dip in the freeway at 80 mph.
I paid $10 for a whole 20ft roll (comes in a box) of baseboard molding in the “office supplies dept” of Home Depot.
Then $5 for a box of the wide head autobody screws from AutoZone. The wide head screws dont leave the dimple effect if you refrain from over tightening.
S13 Automatic to Manual Seat Belt Conversion
We all know that the automatic seat belts in an S13 suck.So, let’s get rid of them safely and efficiently, saving hassle and weight in the process.
Difficulty: ***
Time: 2-4 hours
Cost: $50+…
Cheap 240sx Sway Bar Link Upgrade
How to: Cheap 240SX Sway Bar End Link Upgrade! BY: Dano Our cars are old, so are the stock rubber bushings. Chances are your stock swaybar endlinks bushings are dried, cracked and rotting. Here’s a cheap solution, AND you can get all the parts from your local Autozone for under $30! Tools and Supplies -12mm […]
SR20DET Oil strainer / pickup tube replacement.
A common problem with early model SR20DET engines is the poor design of the oil strainer. Over time, the strainer itself can break free from the pickup tube. This leads to oil pressure problems, and possibly total engine failure. This article should help you figure out if yours is broken, and how to replace it. […]
Make Your Own Shift Boot!
So I was bored today and I had been talking about about it with a friend. We were gonna try just for fun to see if we could make a shift boot. So i went out to Wal-Mart today, bought so supplies and went to it. Actually came out really good..
Difficulty: **
Time: 1 hour
Cost: less than $10…
- « Previous Page
- 1
- …
- 17
- 18
- 19
- 20
- 21
- …
- 24
- Next Page »