Overview Since we are now in the hottest part of the year, I thought I would create this thread so that the do it yourself people can fix their own AC problems, or at least give themselves a vague idea on what’s going on…. Refrigerants All cars up until 1992 or 1993 used R12, which […]
Nissan Altima How To Replace Front & Rear Rotors
In this tutorial, we will show you how to replace your OEM rotors with aftermarket Stillen rotors on a Nissan Altima. It is a very easy procedure and requires the following: Difficulty: Easy Tools: Jack & stand, 19mm wrench (not socket/ratchet) Time: Roughly 20 minutes per rotor Front: Comparison Step 1: Starting at the front, […]
Swap standard rearview for homelink mirror
I ordered one off ebay for $150 + $10 shipping. I brought my car into the dealer this morning for some other fixes (dash brake light out, some rattles) and since I was there and have more money than time lately I had the tech install it (1 hr labor = $105). But, I can […]
Nissan Altima DIY License Plate Bumper Plugs
This tutorial will show you how to make a DIY License Plate Bumper Plugs which are readily available at any Lowes or hardware store. You will need the following items: Hillman Push Fasteners “Nissan” #881204 or #881206 X-Acto Knife Touch Up Paint Clear Coat Sandpaper Procedure: 1. You can get these fasteners at Lowe’s. I […]
Turn3 Nissan Versa Takes it to the Track
BUTTONWILLOW, CA, November 14th – Nissan’s new Versa subcompact car recently appeared somewhere many people never thought it would… at a racetrack. Attendees to Primedia’s annual Time Attack event at Buttonwillow Raceway on November 8th were visibly shocked to see a Versa running through the pits and carving up the track alongside cars with two […]
Nissan Altima K&N Intake Install Guide for 2.5
This tutorial will guide you on how to install a K&N intake on a 2.5 Nissan Altima Supplies needed: K&N intake “kit” 8mm and 10mm sockets ratchet and extension philips and flathead screwdrivers 3mm and 5mm allen key wrenches pliers rags (box of rags works wonders) Steps: 1) Turn off the ignition and disconnect the […]
Altima Coupe Taillight Removal
First you have to pull away the trunk wall carpeting from its original position near the tail light. You do this by simply finding where its carpet edges meet the car body near the top of the trunk bowl and pulling on it. However once you get near the inside you can see theres a […]
Stillen Versa at SEMA 2006
With the recent introduction of new models in the US such as the Honda Fit and Toyota Yaris, there is little doubt that the “economy” car is back. Yet the new economy car is nothing like what many of us remember. Gone are the days of the $4000 Subaru Standard hatchback, a car so inexpensive […]
Nissan Altima: Install the Stillen Front Strut Tower Bars
So my new Stillen Strut tower brace came in and I was excited as hell to install it. At first I wasn’t going to do a full write up on it since Stillen’s instructions are pretty clear but also includes the the instructions to install it on the 09 Maxima but I know that there […]
Nissan Altima Aftermarket HID Installation without Bumper Removal
First, always disconnect the negative terminal of the battery when working with power Remove wheels. Always chock your back tires for safety. Underneath the bumper, there are 3 screws on each side which need to be removed. Not the clips, just the screws. Inside the well, you’ll find about 8-9 clips that have […]
- « Previous Page
- 1
- …
- 11
- 12
- 13
- 14
- 15
- …
- 26
- Next Page »






