One of the first things I noticed when I got my s13 was the ugly door and glove box covering that didn’t match the interior. Here is what I did.
Time: 1 hour
The car is a 1990 s13 with a redtop SR. Parts:KA throttle bodyShort piece of electrical wire (about 1.5 feet) Procedure:First things first, swap over the throttle body from your old KA onto the SR. Next, there are two different ways you could go. What seems like the easiest is to use the KA throttle […]
I know this is an old trick but I was so proud of my $15 lip I just had to post it! I put it on the other day and I think it looks pretty good.
Its no PDM lip but it also doesnt make me cringe every time enter a high angle driveway or hit a dip in the freeway at 80 mph.
I paid $10 for a whole 20ft roll (comes in a box) of baseboard molding in the “office supplies dept” of Home Depot.
Then $5 for a box of the wide head autobody screws from AutoZone. The wide head screws dont leave the dimple effect if you refrain from over tightening.
Applied Vehicle(s): Nissan 240SX Difficulty Rating: Estimated Labor Time: 4 hours Written By: Unknown Estimated Total Cost: $750.00 – $3000.00 Find related tutorials and information on your vehicle in NICOclub’s Nissan Forums & Infiniti Forums Overview: Coilovers allow the ultimate in adjustable suspension performance for your car, and they are easier to install than a […]
HOW TO: WORKING CRUISE CONTROL in a AUTO to 5-speed swapped cars. Applied Vehicle(s): 1991-1994 Nissan 240sx Difficulty Rating: Estimated Labor Time: 1½ hours Written By: music24 Estimated Total Cost: N/A Find related tutorials and information on your vehicle in NICOclub’s 240sx Technical Forum There is an Inhibitor relay underneath the the stock air box. […]